Canyon 2WD L4-2.9L (2008)
3. Install the jack in the stowage bracket by positioning the jack on the 2 studs then turning the jack handle to tighten the jack in the bracket.
4. Install the jack stowage cover. Refer to Jack Stowage Cover Replacement (See: ) .
Jack Stowage Cover Replacement
Jack Stowage Cover Replacement
Removal Procedure
1. Remove the screw securing the jack cover to the jack stowage bracket.
2. Remove the jack cover by lifting up to release the tab from behind the jack stowage bracket.
Installation Procedure