Canyon 2WD L4-2.9L (2008)
7. Connect the seat belt buckle electrical connector (1).
8. Install any clips or straps securing the electrical harness to the bottom of the seat cushion frame.
9. Position the seat back assembly on the seat cushion assembly.
10. Install the 2 bolts (1) securing the seat recliner to the seat adjuster.
Tighten the front seat recliner bolts to 24 N.m (18 lb ft).
11. Install the lumbar adjustment mechanism (1) to the seat adjuster with the 2 screws (2).
12. Install the lumbar cable to the lumbar adjustment mechanism.