Canyon 2WD L4-2.9L (2008)
13. Install the seat switch bezel, if equipped. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Service and
Repair/Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement) .
14. Install the lumbar knob by pushing the knob straight onto the shaft, if equipped.
15. Install the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver Seat and
Passenger Seat Recliner Handle Replacement) .
16. Install the front, rear, and side J-strips (1, 2) to the underside of the seat.
17. Install the 3 bolts (1) securing the cupholder bracket to the seat frame, if equipped.
Tighten the front seat cupholder bracket bolts to 9.1 N.m (80 lb in).
18. Install the front seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion Outer Trim Panel
Replacement) .