Canyon 2WD L4-2.9L (2008)
1. Install the heater core to the HVAC module.
2. Install the heater core clamp (2).
Notice: Refer to Fastener Notice.
3. Install the heater core clamp screws.
Tighten the screws to 1.9 N.m (17 lb in).
4. Install the heater core pipes clamp (2).
5. Install the heater core pipes clamp screw (3).
Tighten the screw to 20 N.m (15 lb ft).
6. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement (See: Heating and Air Conditioning/Housing Assembly
HVAC/Service and Repair) .