Canyon 2WD L4-2.9L (2008)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement
Heater Inlet Hose Replacement
Tools Required
*
J 38185 Hose Clamp Pliers
*
J 43181 Heater Line Quick Connect Release Tool
Removal Procedure
1. Drain the engine coolant. Refer to Cooling System Draining and Filling (Static Fill) (See: Service and Repair)Cooling System Draining and
Filling (Vac N Fill) (See: Service and Repair) .
2. Using the J 43181, release the inlet heater hose quick connect (1) from the heater core inlet.
3. Position the inlet heater hose clamp (4) at the engine block using J 38185.
4. Remove the heater inlet hose (3) from the inlet hose fitting (6) at the engine block.
5. Remove the heater inlet hose (3).
Installation Procedure