Canyon 2WD L5-3.5L VIN 6 (2004)
![background image](/gmc/canyon_2wd/l5-3.5l_vin_6/Page-1316002.png)
7. Remove the bolt and gaskets from the brake caliper.
8. Remove the brake hose from the brake caliper.
9. Remove the copper gaskets from the brake hose bolt. These gaskets may stick to the brake caliper or the brake hose bolt.
Installation Procedure
Important DO NOT reuse the old copper gaskets. Always use NEW metal copper gaskets.
1. Install the copper gaskets on the brake hose.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the brake caliper bolt to the brake caliper.