Canyon 2WD L5-3.5L VIN 6 (2004)
Brake Hose/Line: Service and Repair
Brake Hose Replacement - Rear
Brake Hose Replacement - Rear
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.,
1. Raise the vehicle. Refer to Vehicle Lifting.
Important Inspect the condition of the retaining clip. If the retaining clip is flatten or damaged, discard and replace with new.
2. Remove the retaining clip from the mounting bracket.
3. Using a backup wrench, remove the brake line from the brake hose.
Important Install a rubber cap or plug to the exposed brake pipe fitting in order to prevent brake fluid loss and contamination.
4. Install a rubber cap or plug in the brake line.