Canyon 2WD L5-3.5L VIN 6 (2004)
Evaporative Emissions Hose: Service and Repair
EVAP Hoses/Pipes Replacement - Engine
EVAPORATIVE EMISSION (EVAP) HOSES/PIPES REPLACEMENT - ENGINE
REMOVAL PROCEDURE
CAUTION:
-
Refer to Fuel and EVAP Pipe Caution in Service Precautions.
-
Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.
1. Refer to Quick Connect Fitting(s) Service (Plastic Collar) in order to disconnect the evaporative emission (EVAP) hose (1) from the following:
-
The throttle body assembly (2)
-
The EVAP canister purge solenoid valve (3)
2. Remove the EVAP hose (1) from the engine.
INSTALLATION PROCEDURE
1. Position the EVAP hose (1) to the engine.
2. Refer to Quick Connect Fitting(s) Service (Plastic Collar) in order to connect the EVAP hose to the following:
-
The throttle body assembly (2)
-
The EVAP canister purge solenoid valve (3)
