Canyon 2WD L5-3.5L VIN 6 (2004)
Seals and Gaskets: Service and Repair
Transmission Housing Oil Seal Replacement
Transmission Housing Oil Seal Replacement - Rear (RWD)
^
Tools Required
-
J 45868 RWD Output Shaft Seal Installer
Removal Procedure
1. Remove the rear propeller shaft.
2. Using a suitable tool, pry the rear transmission housing oil seal from the transmission housing.
Installation Procedure
1. Using the J 45868 and a hammer, install the NEW rear transmission housing oil seal.
2. Check the transmission fluid level. Add if necessary.
3. Install the rear propeller shaft.