Canyon 2WD L5-3.5L VIN 6 (2004)
Transmission Speed Sensor: Service and Repair
Vehicle Speed Sensor (VSS) Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Disconnect the Vehicle Speed Sensor (VSS) electrical connector (2).
3. Remove the VSS with O-ring seal.
Installation Procedure
Notice: Refer to Component Fastener Tightening Notice in Service Precautions.
1. Install the VSS with O-ring seal.
^
Tighten the Vehicle Speed Sensor (VSS) to 17 Nm (13 ft. lbs.).
