Envoy 4WD V8-5.3L VIN M (2005)
13. Connect the following electrical connectors:
^
EVAP purge solenoid (1)
^
KS (2)
^
MAP sensor (3)
^
Main coil (5)
^
Fuel injectors (4)
14. Perform the following steps in order to connect the fuel injector electrical connectors.
0. Install the connectors to their corresponding injectors to ensure correct reassembly.
1. Connect the fuel injector electrical connector.
2. Push the CPA retainer (2) on the connector in one click.
3. Repeat the steps for each injector electrical connector.
15. Install the harness clips to the fuel rail.