Envoy 4WD V8-5.3L VIN P (2004)
![background image](/gmc/envoy_4wd/v8-5.3l_vin_p/Page-2618015.png)
11. Install the SIR electrical harness (2) to the seat pan.
12. Install the front/rear J strips (2,4).
13. Install the side J strips (1,3).
14. Install the seat pan to the seat adjuster frame.
15. Install the 4 retaining nuts to the studs on the underside of the cushion.
Tighten the nuts to 25 N.m (18 lb ft).
16. Install the 3 seat switch bezel screws.
Seat Cushion Pull Strap Replacement - Rear No. 1 (Short Wheelbase)
SEAT CUSHION PULL STRAP REPLACEMENT - REAR NO. 1 (SHORT WHEELBASE)
REMOVAL PROCEDURE
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the rear-seat cushion cover and the pad.
3. Remove the strap (1) from the rear seat cushion latch (2).
INSTALLATION PROCEDURE