Envoy 4WD V8-5.3L VIN P (2004)
1. Install the small loop (1) onto the rear seat cushion latch (2).
2. Install the strap through the opening in the seat pan.
3. Install the rear-seat cushion cover and the pad.
4. Install the rear seat cushion assembly to the vehicle.
Seat Cushion Replacement - Rear No. 1 (Short Wheelbase)
SEAT CUSHION REPLACEMENT - REAR NO. 1 (SHORT WHEELBASE)
REMOVAL PROCEDURE
1. Remove the rear seat bracket trim cover.
2. Remove the hydraulic jack from the jack stowage area, on the left side only.
3. Position the seat cushion assembly in order to gain access to the 2 rear seat mounting nuts.
4. Remove the 2 mounting nuts.
5. Remove the seat cushion assembly from the vehicle.
INSTALLATION PROCEDURE