K 1500 Truck 4WD V8-393 6.5L DSL VIN P (1995)
Wheel Hub: Service and Repair
FRONT HUB/BEARING
Hub, Knuckle, And Control Arm Components
REMOVE
1. Disconnect battery ground cable.
2. Raise and support vehicle, then remove wheel and tire assembly.
3. Remove brake caliper. Support caliper with piece of wire to prevent damage to brake line.
4. Pull rotor off of hub.
5. Drive axle nut.
6. Washer.
7. Remove hub and bearing assembly using a puller.
INSTALL
1. Reverse procedure to install.
