K 1500 Truck 4WD V8-4.8L VIN V (1999)
Parking Brake Shoe: Service and Repair
REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the tire and the wheel.
3. Remove the caliper and mounting bracket as an assembly.
4. Relieve the tension on the park brake cables by loosening the nut at the equalizer.
5. Remove the parking brake cable from the lever.
6. Remove the rotor.
7. Remove the axle shaft.
8. Turn the adjustment screw (1) to the fully home position in the notched adjustment nut.
9. Remove the park brake shoe assembly by sliding the shoe (2) towards the retaining spring (3) until the shoe is disengaged from the spring.