gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Brake Rotor Assembled Lateral Runout Correction - Indexing|Page 14467 > < Brake Rotor Assembled Lateral Runout Correction - Indexing|Page 14465
Page 1
background image

Brake Rotor/Disc: Service and Repair
Disc Brake Backing Plate Replacement

W/NYS

Disc Brake Backing Plate Replacement - Rear (15 Series W/NYS)

Caution: Refer to Brake Dust Caution in Cautions and Notices.

Removal Procedure

1. Release the park brake.
2. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
3. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.

4. Relieve the tension from the park brake cable by pulling down on the intermediate cable then release the cable from the equalizer bar.

5. Remove the rear park brake bracket bolt.

6. Remove the park brake cable from the park brake actuator lever.

Brake Rotor Assembled Lateral Runout Correction - Indexing|Page 14467 > < Brake Rotor Assembled Lateral Runout Correction - Indexing|Page 14465