K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
7. Remove the wheel bearing. Refer to Wheel Hub and Bearing Replacement in Rear Wheel Steering.
8. Remove the park brake shoe.
9. Remove the park brake actuator lever housing from the backing plate.
10. Remove the backing plate.
Installation Procedure
1. Install the park brake actuator lever housing to the backing plate.
2. Install the park brake shoe.
3. Install the wheel bearing and adjust the park brake shoe. Refer to Wheel Hub and Bearing Replacement in Rear Wheel Steering and Park Brake
Adjustment in Park Brake.
4. Install the park brake cable to the park brake actuator lever.
Note: Refer to Fastener Notice in Cautions and Notices.
5. Install the rear park brake bracket bolt.
-
Tighten the bolt to 61 N.m (45 lb ft).
6. Install the park brake cable to the equalizer bar.
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
8. Lower the vehicle.
W/O NYS
Disc Brake Backing Plate Replacement - Rear (W/O NYS)
Removal Procedure
Caution: Refer to Brake Dust Caution in Cautions and Notices.