K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
To correct these conditions, it is necessary to replace the outside door handle assembly with a redesigned handle assembly (P/N 15686155 LH or
15686156 RH). To stop the door handle spring from moving, a rib was added to the bezel (figure 1) and a piece of foam tape was placed over the hole to
prevent water from entering the lock cylinder (figure 1).
SERVICE PROCEDURE:
1.
Remove door trim panel.
2.
Remove door module and window.
3.
Remove outside handle rod from rod clip.
4.
Remove lock cylinder rod from lock cylinder clip.
5.
Remove outside handle mounting screws.
6.
Remove door lock cylinder from the outside handle housing.
7.
Remove door handle assembly.
8.
Install revised door handle assembly (P/N 15686155 LH or 15686156 RH).
9.
Install door lock cylinder to the outside handle housing.
10.
Install lock cylinder rod to the lock cylinder clip.
11.
Install handle rod to the handle assembly clip.
