K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
1.
Remove the door trim panel (refer to "Door Trim Replacement" procedure in the appropriate service manual).
2.
Drill out the six rivets holding the inner door handle housing in place.
3.
Remove the control rods from the inner handle housing.
4.
Remove the inner door handle housing.
5.
Disconnect the power switch wire harness (if applicable).
6.
Install a revised inner door handle housing (P/N 22086873 (LH) or 22086874 (RH)).
7.
Connect the power switch wire harness (if applicable).
8.
Connect the control rods to the inner door handle housing.
9.
Install the inner door handle housing rivets.
10.
Install the door trim panel.
SERVICE PARTS INFORMATION:
Part
Number
Description
22086873
Control Assembly-FRT S/D I/S HDL & LK (LH)
22086874
Control Assembly-FRT S/D I/S HDL & LK (RH)
Parts are currently available from GMSPO.
WARRANTY INFORMATION:
For vehicles repaired under warranty use:
Labor
Labor
Op.
Description
Time
B4301
Handle and remote control, front
0.6 hrs.
door lock - R&R or replace (LH).
B4300
Handle and remote control, front
0.6 hrs.
door lock - R&R or replace (RH).