K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Parts Information to Install Plates, Reinforcing Existing Hinges
Parts are currently available from GMSPO.
D.
Service Procedure to Install Door Trim Strap Kit
1. Roll the window down all the way and remove the cowl kick trim panel.
2. Remove the window crank handle, the door handle trim plate, and the 2 armrest screws to remove the door trim panel. Refer to bulletin
361015 dated February 1994 on Door Trim Panel Removal.
3. Partially peel back the tar paper from the area nearest the door hinge. Refer to Figure 1, View A.
4. Roll up the window all the way. Remove lower bolt and washer from the door window run channel and discard.
