K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
10.
Place the reinforcement into the position as shown in Figure 4. Using c-clamps, or vise grips, clamp the bracket into position. It should be noted
that it is very important that the bottom of the reinforcement be flush with the lower radius of the frame rail (Figure 4).
11.
Weld the bracket reinforcement in the positions shown in Figure 5.
12.
Reinstall the half shaft to the differential carrier.
Warranty Information:
For vehicles repaired under warranty, use:
Note:
Labor operation is coded to base vehicle coverage in the warranty system.
