K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Tighten
^
Shaft nut (21) to 17 N.m (12 ft.lbs.) with J 33022.
-
Use J 33027-A to hold the clutch plate and hub assembly (22).
-
Hand spin the pulley (26) to check for free rotation.
-
Remove the compressor from J 34992.
Pulley and Bearing Assembly
Compressor Components
Remove or Disconnect
Tools Required:
J 6083 Snap Ring Pliers
J 9398-A Pulley Bearing Remover
