K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
^
Turn the puller center Dolt to the right with a socket wrench until the rotor pulley is free.
6. Rotor bearing.
^
Remove the snap ring from the rotor.
^
Place the rotor in a vise.
^
Install J 37795 and J 29886.
Removing The Bearing
^
Tap the bearing (6) out.
7. Field coil (10).
^
Loosen the coil lead wire from the clip on top of the compressor front housing.
Removing The Coil Snap Ring
^
Remove the snap ring (7).
^
Remove the coil.
