K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
Pulley Rotor & Bearing Installation
5. Pulley rotor and bearing to the front head using J 9481-A and J 29886.
6. Rotor and bearing assembly retainer ring using J 6083.
7. Clutch plate and hub assembly.
V-Groove Drive
Remove or Disconnect
1. Pulley rim mounting screws and washers.
2. Pulley rim off the rotor and hub assembly.
Install or Connect
Tools Required:
^
J 26271-A Rotor and Bearing Installer
^
J 29886 Driver Handle
Installing The Rotor And Bearing (V-Groove Type)
1. The coil, pulley rim and the rotor and bearing assembly.
2. Loctite 601 or equivalent on the rim screw threads.
3. Screws. Do not tighten.
4. The assembly on the front head.
^
Make sure the clutch coil terminals are aligned correctly.
^
Make sure the protrusions on the rear of the coil align with the front head locator holes.
