K 2500 Truck 4WD V8-379 6.2L DSL VIN C FI (1989)
5. Clutch coil assembly using J 26271-A and J 29886.
6. Retaining ring.
Poly-Groove Drive
Remove or Disconnect
Tools Required:
J 8433 Puller
J 24092 Puller Legs
J 25031 Guide
^
Clutch coil from the front head using the tools as shown in the illustration.
Install or Connect
Tools Required:
J 26271-A Rotor and Bearing Installer
J 29886Driver Handle
1. The coil assembly on the front head neck.
^
Align the marks made at disassembly.
2. Rotor and bearing assembly on the front head.
^
Make sure the clutch coil terminals are aligned correctly.
^
Make sure the protrusions on the rear of the coil align with the front head locator holes.