K 2500 Truck 4WD V8-8.1L VIN G (2001)
Rear Window Lower Garnish Molding Replacement
Removal Procedure
1. Carefully pull the lower edge of the molding in order to release the four clips.
2. Lift the molding up and away from the glass in order to release the upper retainers.
Installation Procedure
1. Align the molding clips with the holes in the body panel along the back glass.
2. Snap the molding into place.
3. Apply light pressure along the top of the molding at the glass to ensure proper seating of molding.
4. Align the lower row molding clips.
5. Snap the lower portion of the molding into place.
Rear Window Upper Molding Replacement
Rear Window Upper Molding Replacement
Removal Procedure
1. If equipped, remove the screws that retain the molding to the vehicle.
2. Remove the rear window upper garnish molding from the roof panel.
Slide the nylon slipstick, or the equivalent, between the roof panel and the garnish molding near the clips.