K 2500 Truck 4WD V8-8.1L VIN G (2001)
3. Pull the rear window upper garnish molding downward while performing the previous step.
Installation Procedure
1. Install the rear window upper garnish molding to the rear body panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retainer screws, if equipped.
Tighten the rear window upper garnish molding screws to 2 N.m (18 lb in).
Trim Panel Replacement - Upper Extension
REMOVAL PROCEDURE
1. Open the front door.
2. Release the upper extension by pulling outward in order to release the upper retainer clip.
3. Remove the upper extension from the trim panel by lifting up and out.
INSTALLATION PROCEDURE