K Yukon/Denali 4WD V8-5.7L VIN R (2000)
7. Remove the latch bolts.
8. Remove the latch from the door.
Installation Procedure
1. Install the latch to the door.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the latch bolts.
Tighten the latch bolts to 25 N.m (18 lb ft).
3. Connect the control rod (1) to the latch.
4. Install the access hole cover, as necessary.
5. Install the water deflector, as necessary.
6. Install the door trim panel.
Door Latch Replacement (Lower)
Door Latch Replacement (Lower)
Removal Procedure