K Yukon/Denali 4WD V8-5.7L VIN R (2000)
1. Note the alignment of the door latch by completing the appropriate step:
*
Use the striker as an alignment guide.
*
If the striker has been removed, mark the location of the door latch.
2. Remove the latch assembly bolts.
Installation Procedure
1. Install the latch assembly bolts.
Notice: Refer to Fastener Notice in Service Precautions.
2. Adjust the latch assembly alignment.
Tighten the bolts to 24 N.m (18 lb ft).
Door Latch Replacement (Upper)
Door Latch Replacement (Upper)
Removal Procedure
