K Yukon/Denali 4WD V8-5.7L VIN R (2000)
Seat Heater: Service and Repair
Driver Seat Back Cushion Heater and Passenger Seat Back Cushion Heater Replacement
Driver Seat Back Cushion Heater and Passenger Seat Back Cushion Heater Replacement
Removal Procedure
On the Escalade, the heating element is taped to the seat cushion. On the base vehicles and the Denali, the heating element is sewn into the seat cover and
not serviceable separately. On these vehicles, the cover must be replaced.
1. Remove the seat from the vehicle.
2. Remove the seat back trim cover.
3. Remove the seat back heater.
4. Disconnect the seat back heater harness.
Installation Procedure
1. Connect the seat back heater harness.
2. Install the seat back heater.
3. Install the seat back trim cover.
4. Install the seat in vehicle.
