S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
Steering Gear: Service and Repair
Steering Gear Replace
1.
On models equipped with power steering, disconnect pressure and return hoses from steering gear housing, then plug hose ends and gear housing
ports to prevent entry of dirt.
2.
On all models, disconnect battery ground cable and remove coupling shield if so equipped.
3.
Remove retaining nuts, lock washers and bolts at steering coupling to steering shaft flange.
4.
Remove pitman arm nut and washer from pitman shaft and mark relation of arm position to shaft, then remove pitman arm using a suitable puller.
5.
Remove screws securing steering gear to frame and remove gear from vehicle.
6.
Reverse procedure to install.
