gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Suspension > < Manual Steering Gears - Saginaw Recirculating Ball Worm & Nut|Page 4611
Page 1
background image

Steering Wheel: Service and Repair

1.

Disconnect battery ground cable.

2.

Remove steering wheel trim pad retaining screws from underside of steering wheel spokes, then lift off trim pad and remove wiring connector.

3.

Remove snap ring and nut from steering shaft.

4.

Remove steering wheel using puller J-2927.

5.

Reverse procedure to install.

Suspension > < Manual Steering Gears - Saginaw Recirculating Ball Worm & Nut|Page 4611