S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
Fluid Pan: All Technical Service Bulletins
A/T - Updated Side Cover Or Bottom Pan Removal
85-36
7A (VIIc)
FEB., 1985
Subject:
USAGE OF HEX HEAD SCREWS AND CONICAL WASHER ASSEMBLIES
Model and Year:
THM TRANSMISSIONS OR TRANSAXLES
TO:
ALL CHEVROLET DEALERS
When servicing any THM transmission or transaxle and removal of the side cover and/or bottom pan is required, IT IS NOT ALWAYS NECESSARY
TO REPLACE THE HEX HEAD SCREWS AND CONICAL WASHER ASSEMBLIES.
HEX HEAD SCREW AND CONICAL WASHER ASSEMBLY
NOTICE:
Screws with the coating stripped away exposing the exterior portion of the head or washer should be replaced. Also, replace those hex
head screws if the washer is inverted (see illustration below).
Insert this information in the appropriate section of your 1985 service manual.
