S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
Fluid Pump: All Technical Service Bulletins
A/T - Oil Pump Rotor and Slide Service Procedure
Number:
84-108
Section:
7A (VIIc)
Date:
April, 1984
Subject:
SERVICE PROCEDURE FOR THE
OIL PUMP ROTOR AND SLIDE
Model and Year: ALL THM 200-4R AND 700-R4
TRANSMISSIONS
FIGURE 1 - THM 200-4R
TO:
ALL CHEVROLET DEALERS
Beginning mid-November, 1983, service parts became available to service the oil pump rotor and slide of the pump body assembly, on
all THM 200-4R and 700-R4 transmissions. This service procedure on all THM 200-4R and 700-R4 transmissions must be followed to
assure proper end clearance on the oil pump rotor and slide.
SERVICE PROCEDURE
NOTICE:
DO NOT attempt to service the oil pump rotor if either the pump body pocket or pump body cover surfaces are scored.
Servicing of the oil pump rotor and slide should be performed ONLY if the selective pump rotor, or the slide show wear.
FIGURE 2 THM 700-R4
1.
Disassembly of the Oil Pump
A.
Disassemble the oil pump body assembly following procedures outlined in the service manual. Refer to Figure 1 for the THM 200-4R and
Figure 2 for the THM 700-R4 oil pump body assembly..
