S15/T15 Jimmy 2WD L4-119 1.9L VIN A 2-BBL (1983)
FIGURE 1 - INPUT CLUTCH HOUSING
Input Hsg. & Shaft Asm.
Retainer Asm.-Ball Check
"O" Ring
Capsule
First Design
(Figure #1)
P/N 8634503
P/N 8630049
P/N 8647127
Second Design
(Figure #1)
P/N 8647037
P/N 8636033
P/N 8647128
Follow your service manual guidelines when installing the retainer assembly-ball check capsule. The turbine shaft "O" ring should not be installed until
after the oil pump assembly is installed to prevent damage to the "O" ring.
