S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
Air Duct: Service and Repair
Heating System
Air Inlet Assembly
Removal Procedure
1. Remove the instrument panel.
2. Disconnect the vacuum connector.
3. Remove the body harness connector (C203) support bracket mounting nuts.
4. Remove the bracket from the lower 2 air inlet assembly mounting studs.
5. Remove the air inlet assembly mounting studs (3).
6. Remove the air inlet assembly (2).
7. Remove the air inlet assembly gasket (1), if necessary.
Installation Procedure
