S15/T15 Sonoma P/U 2WD V6-4.3L VIN X (1998)
1. Install the air inlet assembly gasket (1), if necessary.
2. Install the air inlet assembly (2).
3. Install the air inlet assembly mounting studs (3).
Tighten
Tighten the bolts to 4.5 N.m (40 lb in).
4. Install the body harness connector (C203) support bracket to the lower 2 air inlet assembly mounting studs.
5. Install the bracket mounting nuts.
Tighten
Tighten the nuts to 9.0 N.m (80 lb in).
6. Install the vacuum connectors.
7. Install the instrument panel.
Air Distributor Duct
Removal Procedure
1. Remove the instrument panel.