Safari Van 2WD V6-4.3L VIN X (2003)
1. Install the regulator (3) to the door:
1. Place the window regulator into the door through the access hole.
2. Place the window regulator arm rollers into the sash and the regulator rail.
3. Push the window regulator through the regulator door opening and align the holes in the regulator with the holes in the door.
2. Install the rivets to the window regulator (3) using the M 39010 .
3. Connect the wiring harness to the power window regulator, if equipped.
4. Install the water deflector. Refer to Water Deflector Replacement - Front Door See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair.
5. Install the inner panel upper bar with the bolts.
Tighten the bolts to 25 N.m (18 lb ft).
6. Remove the tape from the door and the window.
7. Check the window operation.
8. Install the trim panel. Refer to Trim Panel Replacement - Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair) .
