Safari Van 2WD V6-4.3L VIN X (2003)
Window Track: Service and Repair
Window Run Channel Replacement
Removal Procedure
1. Roll the window up completely.
2. Remove the trim panel. Refer to Trim Panel Replacement - Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair) .
3. Use a sharp bladed tool, if needed, in order to separate the water deflector at the perforations. Refer to Water Deflector Replacement - Front Door
See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair.
4. Remove the door to window run channel bolt.
5. Pull the run channel away from the upper channel (which is part of the door) in order to remove the window run channel from the door.
Installation Procedure
1. Slide the clip of the channel into the upper channel in order to install the window run channel to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the door to window run channel bolt.
Tighten the door to window run channel bolt to 9.5 N.m (84 lb in).
3. Install the water deflector. Refer to Water Deflector Replacement - Front Door See: Body and Frame/Doors, Hood and Trunk/Doors/Front
Door/Front Door Panel/Service and Repair.
4. Install the trim panel. Refer to Trim Panel Replacement - Door (See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door
Panel/Service and Repair) .
