Savana 1/2 Ton Van V8-5.7L VIN R (2001)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
Removal Procedure
1. Remove the air cleaner assembly.
2. Remove the engine cover.
3. Remove the bolt holding both oil level indicator tubes together.
4. Remove the top half of the oil level indicator tube from the bottom half.
5. Clean the old sealer from the tube.
6. Remove the spark plug for the number 4 cylinder.
7. Remove the oil level indicator tube bolt.
8. Remove the oil level indicator tube from the engine using a twisting motion.
9. Clean the old sealer from the oil level indicator tube and the engine block.
Installation Procedure