Savana 1/2 Ton Van V8-5.7L VIN R (2001)
12. Install the TCC solenoid with a new O-ring seal to the valve body.
Notice: Refer to Fastener Notice in Service Precautions.
13. Install the TCC solenoid bolts.
^
Tighten the TCC solenoid retaining bolts to 11 Nm (97 inch lbs.).
14. Install the internal wiring harness to the valve body. The internal wiring harness has a tab on the edge of the conduit. Place the tab between the
valve body and the pressure switch. Press the harness into position on the valve body bolt bosses.
15. Install the TCC PWM solenoid (1) to the control valve body.
16. Install the TCC PWM solenoid retainer (2).