Savana 1/2 Ton Van V8-5.7L VIN R (2001)
17. Install the transmission fluid indicator stop bracket (1) and bolt (2).
Notice: Refer to Fastener Notice in Service Precautions.
^
Tighten the transmission fluid indicator stop bracket bolt to 11 Nm (97 inch lbs.).
18. Connect the internal wiring harness electrical connectors to the following components:
^
The transmission fluid pressure manual valve position switch (1)
^
The 1-2 shift solenoid (2)
^
The 2-3 shift solenoid (3)
^
The pressure control solenoid (4)
^
The TCC PWM solenoid (5)
^
The 3-2 shift solenoid (6)
19. Install the transmission oil pan and filter.
20. Lower the vehicle.
21. Add transmission fluid to obtain the proper fluid level.
Valve Body
Valve Body
Removal Procedure