Savana 2500 V8-6.6L DSL Turbo (2008)
![background image](/gmc/savana_2500/v8-6.6l_dsl_turbo/Page-589004.png)
4. Remove the J 44643 then rotate the engine to align the timing marks.
5. Reinstall the J 44643 .
6. Install the camshaft into the cylinder block, align the camshaft gear to the crankshaft gear as shown.
7. Apply threadlock to the threads of the camshaft thrust plate bolts. Refer to Sealers, Adhesives, and Lubricants (See: Specifications/Sealers,
Adhesives, and Lubricants) for the correct part number.
Notice: Refer to Fastener Notice .
8. Install the camshaft thrust plate bolts.
Tighten the bolts to 22 N.m (16 lb ft).
9. Install the camshaft reluctor to the camshaft gear.
10. Install the camshaft reluctor bolts.