Savana 2500 V8-6.6L DSL Turbo (2008)
Tighten the bolts in a cross-bolt pattern to 9 N.m (80 lb in) .
11. Reinstall J 44643 in the starter opening, if removed.
12. Install a NEW camshaft gear bolt.
Tighten the bolt to 234 N.m (173 lb ft).
13. Using J 26900-12 (1) and J 26900-13 (2) measure the camshaft end play.
*
The production value is 0.050-0.114 mm (0.002-0.0045 in) and service limit is 0.20 mm (0.008 in).
*
Replace the camshaft gear or the camshaft thrust plate if measured value exceeds the service limit.
Important: Do not damage the teeth on the crankshaft reluctor.
14. Install the oil pump drive gear and reluctor to the crankshaft.