Savana 3500 V8-4.8L (2009)
9. Remove the camshaft retainer bolts (204) and retainer (203).
Caution: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the
camshaft bearings.
10. Install a bolt into the camshaft.
11. Using the bolt as a handle, carefully rotate and pull the camshaft out of the engine block.
12. Clean and inspect the camshaft and bearings. Refer to Camshaft and Bearings Cleaning and Inspection. See: Service and Repair/Overhaul/Repair
Instructions/38. Camshaft and Bearings Cleaning and Inspection
Installation Procedure
