Workshop Repair Manuals

GMC Workshop Manuals

[PREV PAGE] [NEXT PAGE]

gmc Workshop Repair Guides


Savana 3500 V8-4.8L (2009)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Position Actuator Magnet Replacement > Page 1688

Page 8
background image

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).

8. Tighten the CMP actuator solenoid valve.

1. Tighten the valve a first pass to 65 Nm (48 lb ft).
2. Tighten the valve a final pass and additional 90 degrees using J 45059  .

9. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement   (See: Engine Lubrication/Oil Pump/Service and

Repair).

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Position Actuator Magnet Replacement > Page 1688

[PREV PAGE] [NEXT PAGE]