Savana 3500 V8-4.8L (2009)
Drive Belt Tensioner: Service and Repair
Drive Belt Tensioner Replacement - Accessory
Removal Procedure
1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory (See: Drive Belt/Service and Repair/Drive Belt Replacement -
Accessory).
2. Remove the drive belt tensioner bolts.
3. Remove the drive belt tensioner.
Installation Procedure
1. Install the drive belt tensioner.
2. Install the drive belt tensioner bolts.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Tighten the drive belt tensioner bolts to 50 Nm (37 lb ft).
4. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory (See: Drive Belt/Service and Repair/Drive Belt Replacement -
Accessory).