GMC Workshop Manuals
Savana 3500 V8-4.8L (2009)
Engine, Cooling and Exhaust > Engine > Sensors and Switches - Engine > Oil Level Sensor > Component Information > Service and Repair > Page 1989
1. Apply sealant to the threads of the oil pressure sensor. Refer to Adhesives, Fluids, Lubricants, and Sealers (See: Specifications/Adhesives, Fluids,
Lubricants, and Sealers) for the correct part number.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Using J 41712 or equivalent, install the oil pressure sensor and tighten to 35 Nm (26 lb ft).
3. Connect the oil pressure sensor electrical connector (1).
|[PREV PAGE] [NEXT PAGE]|