Savana 3500 V8-4.8L (2009)
1. Connect the evaporator tube (1) to the auxiliary evaporator core and tighten the hose fitting to48 Nm (35 lb ft).
2. Install the evaporator tube retaining nuts (2) to the engine and the body and tighten to6 Nm (53 lb in).
3. Install the bolt retaining the hose (1) to the transmission bracket and tighten to5 Nm (44 lb in).
4. Lower the vehicle.
5. Install the auxiliary evaporator outlet tube to the compressor hose and tighten the fitting to48 Nm (35 lb ft).
6. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
7. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (See: Heating and Air Conditioning/Service and
Repair/Refrigerant Recovery and Recharging).
8. Leak test the fittings of the components using the J 39400-A .
