Savana 3500 V8-4.8L (2009)
Caution: Refer to Power Steering Hose Disconnected Caution (See: Service Precautions).
1. Install a drain pan under the vehicle.
2. Siphon the fluid from the reservoir to prevent excessive spillage.
3. Remove the reservoir inlet hose (3) from the power brake booster (2). DO NOT reuse clamps.
4. Remove the reservoir inlet hose (3) from the reservoir. DO NOT reuse clamps.
5. Remove the reservoir inlet hose from the vehicle.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Route the hose in the same position the hose occupied prior to removal.
2. Install the reservoir inlet hose (3) to the reservoir. Reposition and secure clamps.
3. Install the reservoir inlet hose (3) to the power brake booster (2). Reposition and secure clamps.
4. Bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair).
5. Remove the drain pan from under the vehicle.
Power Steering Fluid Reservoir Outlet Hose Replacement
Power Steering Fluid Reservoir Outlet Hose Replacement
Removal Procedure
Caution: Refer to Power Steering Hose Disconnected Caution (See: Service Precautions).
